Publicidad
Idiomas disponibles
Idiomas disponibles
XQ_6S-ssu - MiNUALI0/22/0111:34AM _m_ 16
Washer
does
not operate:
• Check if unit is plugged
in. The plug may have come loose.
• Check if the electrical
wall receptacle
is of proper
voltage.
• Check if the circuit breaker
needs to be reset or if the fuse needs to be replaced.
• Check if the unit is in "Off"
mode,
• Check if the washer
is overloaded:
load may need to be re-balanced
and clothes
may need to be redistributed.
• Check if the door is open, You may have to close the door properly.
• Check if the control knob is set properly.
You may have to adjust the control
knob.
• The washer
pauses in some cycles. This is normal
in delicate
or hand-washable
cycle, which
has short soak period
where your clothes are being soaked
for very
short period
of time. You will not hear washer
operation
for a short period
of
time, When
the soak time is over,
it will start automatically.
Problems
with
water:
• Not enough
water coming
out: Water faucet may need to be turned on fully.
Water
hoses may be tangled
up or wrinkled
up. Straighten
up hoses. Check water
level selection,
it may need to be readjusted,
• Water Temperature
is incorrect:
Check your water
heater temperature.
Hot water
needs to be at a temperature
at least 120°F -1407
(49°C - 60%).
Check to
make sure the inlet hoses are properly
connected.
(e,g. hot to hot & cold to cold)
• Water
leaks: This is due to not properly
installing
drain
hose or fill hoses. Your
home drain
may be clogged
or having
constant
water pressure,
You may need to
tighten
hoses, check the plumbing
or call a plumber.
• Water
pumped
out before the cycle is completed:
It happens
if you open the door
in the middle
of cycle.
• Water will not drain:
This is due to not installing
your drain
hose properly.
You
may need to connect
the drain
hose properly.
Check the position
of the drain
hose, In order to drain
properly,
make sure that top of drain
outlet is less than 4
ft, (1,2 m) above the floor.
15
Publicidad
