Parkside PMBA 20-Li B2 Traduccion Del Manual De Instrucciones Originale página 9

Noise emission value
Noise measurement value determined in
accordance with EN 60745. The A-rated
noise level of the power tool is typically:
Sound pressure level
Uncertainty K
Sound power level
Uncertainty K
Wear ear muffs!
Wear a dust mask!
Wear protective goggles!
Read the operating instructions
before use!
Total vibration value
(vector total of three directions) determined in
accordance with EN 60745:
Sawing metal
Main handle
Sawing metal
Additional handle
Uncertainty
Sawing wood
Main handle
Sawing wood
Additional handle
Uncertainty
NOTE
► The vibration emission values and the noise
emission values given in these instructions
have been measured in accordance with a
standardised test procedure and can be used
for comparison of the power tool with another
tool.
► The specified total vibration values and the
noise emission values can also be used to
make a provisional load estimate.
PMBA 20-Li B2
L = 78.1 dB (A)
PA
K = 3 dB
PA
L = 89.1 dB (A)
WA
K = 3 dB
WA
a ≤ 2.5 m/s 2
h,CM
a ≤ 2.5 m/s 2
h,CM
K = 1.5 m/s 2
2
a ≤ 2.5 m/s
h,CW
a ≤ 2.5 m/s 2
h,CW
K = 1.5 m/s 2
WARNING!
► Depending on the manner in which the power
tool is being used and, in particular, the kind
of workpiece being worked, the vibration and
noise emission values can deviate from the
values given in these instructions during
actual use of the power tool.
► It is necessary to establish safety measures to
protect the operator based on an estimation
of the vibration load during actual use
(wherein all states of operation must be in-
cluded, e.g. times when the power tool is
switched off and times where the power tool
is switched on but running without load).
General power tool
safety warnings
WARNING!
►
Read all safety warnings, instructions,
illustrations and specifications provided
with this power tool.Failure to follow all
instructions listed below may result in electric
shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-
operated (cordless) power tool.
GB │ IE │
3 ■