Publicidad
Idiomas disponibles
Idiomas disponibles
18. Warning.
Use of any accessory or attachment other than those recommended in this manual may present the risk
of personal injury.
19. Authorized service technician repairs only.
This electric power tool is must only be repaired by an authorized service center. Do not repair yourself or
you may cause damage to the tool and put yourself in danger.
Save these instructions.
ADDITIONAL SAFETY WARNINGS
1. When plugged in, handle the soldering iron with extreme caution, as the high temperatures can cause
serious burns and even unintentional fires.
2. When turning on the soldering iron for the first time, it may give off a little smoke until the paraffin on
the soldering tips evaporate. This may occur for an estimated time of around 10 minutes.
3. Never file the soldering tip.
4. Before cleaning the soldering iron or changing the soldering tip, make sure that it is unplugged and
at room temperature.
5. If the cable is damaged, it must be replaced by either the manufacturer or a technical service center
recommended by the distributor, which is qualified in any case to perform this work.
6. It is recommended to place the soldering iron on a stand when not in use.
PARTS LIST
Nº
Description
1
Soldering Tip
2
Knurled nuts
3
Heat insulation fixed piece
4
Transformer
5
Back cover (a)
6
Front cover (b)
7
Nameplate
8
Screw
9
Cord
10
Cord armor
11
Terminal board
12
Switch
13
Push button
14
Bulb socket
15
Bulb
KIT SEK 100W - SEK 100W
17
Publicidad
