Publicidad
Idiomas disponibles
Idiomas disponibles
extra measure of safety.
* CORD SETS: Make sure the cord
on the unit and the extension
cord are in good condition. The
extension cord should be heavy
enough to carry the current the unit
will draw. An undersized cord wilt
cause a drop in line voltage that
will cause the unit to loose power
and overheat. The above table
shows the correct extension cord
sized based on the cord length and
nameplate ampere rating. If you are
not sure what cord size to use, use
the next heavier size line gauge.
The smaller the gauge number, the
heavier the cord.
* DO NOT ABUSE THE CORD-
Never carry the unit by its cord or
pull on it to disconnect
it from the
receptacle. Keep the cord away
from heat, oil, and sharp edges and
corners.
* ROUTINELY
INSPECT CORDS =
Routinely inspect the units cord as
well as the extension cord used.
Look for cuts, nicks, or cracks in the
cords insulation. Also inspect the
connections to see if they are bent
or broken. Repair or replace cords if
any defects appear.
OPERATIONAL
SAFETY
WARNINGS
* CLEAR WORK AREA: Use of this
edger may cause debris such as
stones, dirt, wood, or metal to be
propelled at a high rate of speed.
Be sure work area is clear of other
persons and pets when using the
edger.
* STAY CLEAR OF BLADE: Always
stand to the left of the unit when
using to avoid being hit by debris
from the blade.
. CHECK FOR BURIED CABLES
BEFORE USE: Before edging or
trenching with this product, be
sure to inspect area for any buried
electrical or other cables.
5
* AVOID HITTING CURBS, TREES,
WALLS, ROCKS, SIDEWALKS
AND OTHER SOLID OBJECTS
WITH EDGER WHILE USING.
* DANGER:
KEEP HANDS, FEET
AND ALL BODY PARTS AWAY
from the blade.
* CAUTION:
Blade coasts after the
unit is turned off. Unplug unit and
wait for blade to come to a complete
stop before placing hands or feet
near the blade.
* DRESS PROPERLY-
Do not wear
loose clothing or jewelry. They can
be caught in moving parts. Use
of rubber gloves and substantial
footwear is recommended
when
working outdoors. Wear protective
hair covering to contain long hair.
Wear long pants to shield legs when
using edger.
= DON'T OVERREACH
- Maintain
proper footing and balance at all
times. Use both hands to operate
unit safely.
* USE SAFETY GLASSES - Always
wear proper eye protection and use
a face or dust mask.
* MAINTAIN UNIT WITH CARE
- Keep the unit clean for best
performance
and to reduce the
risk of injury. Follow instructions for
service. Keep handles dry, clean,
and free from oit and grease.
* UNINTENTIONAL
STARTING-
Don't hold the switch area while
carrying the unit while it is plugged
in. This may cause it to start
inadvertently
if not handled properly.
Be sure the switch is in the off
position when plugging in the unit.
= CHECK DAMAGED PARTS - If
the unit experiences
a hard impact,
check that no parts were damaged
and verify that the unit operates
properly. Check for misalignment
or bending of moving parts,
breakage of parts, and any other
condition that may affect operation.
A part that is damaged should be
Publicidad
