Publicidad
Idiomas disponibles
Idiomas disponibles
ON/OFF
Switch
Electrical
Terminals
Gas Inlet Tap
Electrical
Terminals
3. Install the barbed fitting into the manifold pressure tap.
4. Attach the manometer to the barbed fitting.
5. Turn on the water system and start the heater following the lighting & operating instructions
on the label affixed inside the front access panel. If there is more than one pool/spa heater
connected to the gas supply line, turn each of those appliances "ON" while testing the heater.
USE ONLY HAYWARD GENUINE REPLACEMENT PARTS
H13510, H150-400FDN, H150-500FDP Models
Manifold Pressure
H500FDN Model only
Regulator
Adjustment
Screw Under
This Screw
Cap
Increase
Pressure
Regulator Adjustment Screw
Tap Plug
Gas Inlet Tap
ON/OFF
Knob
Regulator Adjustment
Increase
Pressure
Regulator Adjustment Screw
Decrease
Pressure
Screw Under This
Screw Cap
Decrease
Pressure
4
Publicidad
