Descargar Imprimir esta página

Tascam BD-MP1 MK II Manual Del Usuario página 44

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

During playback, video is disrupted, does not appear or has
a strange color.
o When searching forward or backward, for example, the video
might appear a little irregular.
o Is a mobile phone or other device that emits radio waves
being used nearby?
o Has a disc that is not supported by the unit or that has a differ-
ent region code been loaded in it.
o Does the TV support HDCP?
o With the power on, try disconnecting the HDMI cable from
the TV and this unit and then reconnecting it.
o Use a different HDMI cable and reconnect them.
o Check the "Display Settings" setting.
Subtitles do not appear.
o Subtitles cannot be turned on for titles without subtitle data.
No audio is output from the AV amplifier.
o Confirm that the AV amplifier is turned on.
o Confirm that the AV amplifier output is correct.
o Confirm that the AV amplifier supports bitstream or LPCM.
o Check the volume of the AV amplifier.
The camera angle cannot be changed.
o Angles cannot be changed for BD-Video or DVD-Video that
does not have multiple angles recorded.
o Camera angles can only be changed for scenes that have it
enabled.
High definition resolution cannot be viewed.
o Confirmed that the title recorded in high definition.
o Does the TV connected to the unit support high definition?
HDMI device control does not work.
o HDM device control only works when the necessary settings
have been made for this unit and the other supported device.
o When HDMI device control is enabled, it will be disabled if the
power plug of this device or the HDMI cable is disconnected.
Cannot connect to a network.
o Confirm that the modem and router are turned on.
o Confirm that the modem and router Internet indicators are lit.
o Check the unit's Network settings.
o Confirm that this unit and router are connected correctly.
o Confirm that the router DHCP function is enabled.
A password was forgotten.
o If it has been forgotten, contact TASCAM customer support
service.
44
TASCAM BD-MP1MKII
Specifications
General
Supported media
Disc media
Blu-ray
BD25, BD50, BD-ROM, BD-R(SL, DL), BD-RE(SL, DL)
DVD
DVD-ROM, DVD-R(SL,DL), DVD-RW, DVD+R(SL,DL),
DVD+RW
CD
CD-DA, CD-R, CD-RW
o SL indicates single-layer discs and DL indicates double-layer
discs
o This unit can play only BD and DVD-VIDEO that has the same
region code as shown on the label on its chassis. It can also
play DVD-VIDEO that is ALL.
Disc formats
Blu-ray
BDMV, BDAV
DVD
DVD-Video, DVD-VR, AVCHD
o Blu-ray 3D supported
Supported file formats*
Video
ASF, MPG, AVI, 3GP, DAT, MKV, MOV, M2TS, OGM, TP,
TS, MP4, WMV
Audio
WAV, MP3, WMA, AAC, FLAC, APE
Picture
JPEG, GIF, PNG
Supported
SUB, ASS, IDX+SUB(IDX+SUB)
subtitle file
formats
* USB flash drive and SD card formats must use FAT16, FAT32, exFAT or NTFS file
systems.
Audio
BD/DVD/USB/SD
Sampling
44.1 k/48 k/64 k/88.2 k/96 k/176.4 k/192 kHz
frequency
Bit length
16/24 bit
CD
Sampling
44.1 kHz/48 kHz
frequency
Bit length
16/24 bit
MP3/WMA
Sampling frequency 32 k/44.1 k/48 kHz
Bitrate
MP3
112 kbps - 320 kbps
WMA
48 kbps - 192 kbps
Outputs
HDMI output
Connector
HDMI 19pin Type A
Resolution
480i/576i/480p/576p/720p/1080p
Aspect ratio
16:9 Full, 16:9 Normal, 4:3 Pan & Scan, 4:3
Letterbox
Video format
NTSC, PAL, Multi
HDMI signal system RGB PC level, RGB Video level,
YCbCr(4:4:4), YCbCr (4:2:2)
Digital Audio output
COAXIAL
Connectors
RCA pin jacks
Format
IEC60958-3(S/PDIF)
Output impedance 75 Ω or lower

Publicidad

loading