Teac T-H300 Manual Del Usuario página 8

Adjusting Current Time
————— —— ————————
You can adjust the current time regardless
of power on/off.
24
1 Press the time adj button.
Then "Hour display' indicator will blink.
Ly
t
'
.
My
!
2 Set the hour to "10" (o'clock) using
tuning/select knob
3 Press the next button.
Then "Minute display" indicator will
blink.
5 Press the next button.
@ If you press the time adj button after or
during the minute adjustment,
adjustment will be completed.
@lf you don't proceed to the next
operation within 8 seconds after "Hour
display' indicator begins to blink, current
time adjustment will be cancelled.
Daily Timer
Presetting ON time: AM 7:15
2 Preset the ON timer by using
tuning/select control and the next
button.
~
—
<3
mi
3 Press the next button.
Presetting OFF time: AM 9:30
4 Preset the OFF timer by using
tuning/select control and the next
button.
5 Press the next button and the timer
button.
Presetting is completed.
\ Current Time
* Daily timer makes the system turn on and
off at preset times every day.
* If you want to record at ON time, select
the desired source with the input slector
and then set the timer switch on the
cassette deck R-H300 to the rec position.
* If the timer indicator "TIMER DAILY" is
off, the daily timer doesn't work.
* While setting the daily timer, if the next
button is held depressed, the timer
function will be cancelled
6245
For example)
FM 98.80 MHz, Preset Ch 01.
Station name : BBC 1
uD GME
a =) Mate
EM 9890407
1 Select channel 01 in the preset tuning
mode.
2 Press the file button long (for more
than 1.5 second).
Then "----" will be displayed in the
clock indicator.
s
rt ee
Mi
a uw
Px
3 select "B" with the tuning/select
control,
Press the next button, and then the
cursor will move one space.
(ah | See
5 after selecting "BBC 1" with the
tuning/select control and the next
button, press the next button.
Fil!
6 Press the memory button, and then the
broadcasting station name will be
changed to "BBC 1".
© File display and clock display
While the clock is being displayed,press
the file button briefly; the clock display will
be switched to the file display.
Press the file button briefly again to
resume.