Publicidad
Idiomas disponibles
Idiomas disponibles
Programming the cooking duration
GB
!
If the
and
period of time, the timer scrolls quickly through the minute
values in the corresponding direction.
! All the cooking zones may be programmed
simultaneously, for a duration between 1 and 99 minutes.
1. Select the cooking zone using the corresponding
selector button.
2. Adjust the power level of the cooking zone.
3. Press the
programming button. The indicator light
corresponding to the selected zone will start flashing.
4. Set the cooking duration using the
5. Confirm by pressing the
selection occurs after 10 seconds.
The timer begins counting down immediately. A buzzer
sounds for approximately 1 minute and the cooking zone
switches off when the set programme has finished.
Repeat the above procedure for each hotplate you wish to
programme.
Using multiple programmes and the display
If one or more hotplates are programmed,
the display will show the data for the
hotplate with the least time remaining, and
the light corresponding to the position of the hotplate will
flash. The lights corresponding to the other hotplates
programmed will be switched on.
To visualise the time remaining for the other programmed
hotplates, press the
remaining for each hotplate will be shown sequentially in a
clockwise order, starting from the front left hotplate.
Changing the programme
1. Press the
button repeatedly until the duration you
wish to change is shown.
2. Use the
buttons to set the new duration.
3. Confirm by pressing the
To cancel a programme, follow the above instructions. At
step 2, press the
progressively until it reaches 0 and switches off. The
programme resets and the display exits programming
mode.
3 2
buttons are pressed for an extended
- - - - -
+ + + + +
and
button or automatic
button repeatedly: the time
button.
button: the duration decreases
Timer
The hob must be switched on.
The timer can be used to set a duration up to 99 minutes.
1. Press the
indicator light is illuminated
2. Set the desired duration using the
3. Confirm by pressing the
The timer begins counting down immediately. When the
time has elapsed, a buzzer will sound (for one minute).
Control panel lock
buttons.
When the hob is switched on, it is possible to lock the
oven controls in order to avoid accidental changes being
made to the settings (by children, during cleaning, etc.).
Press the
indicator light above the button will switch on.
To use any of the controls (e.g. to stop cooking), you must
switch off this function. Press the
moments, the indicator light will switch off and the lock
function will be removed.
Switching off the hob
Press the button
rely solely on the pan sensor.
If the control panel lock has been activated, the controls
will continue to be locked even after the hob is switched on
again. In order to switch the hob on again, you must first
remove the lock function.
"Demo" mode
It is possible to set the hob to a demonstration mode
where all the controls work normally but the heating
elements do not switch on. To activate the "demo" mode
the hob must be switched on, with all the hotplates
switched off.
• Press and hold the
for 6 seconds. When the 6 seconds have elapsed, the
ON/OFF and CONTROLS LOCKED indicator lights will
flash for one second. Release the
and press the
• The display will show the text DE and MO and the hob
will be switched off.
• When the hob is switched on again it will be set to the
"demo" mode.
programming button until the timer
.
and
button.
button to lock the control panel: the
button for a few
to switch off the appliance - do not
+ + + + +
- - - - -
and
buttons simultaneously
+ + + + +
and
button;
buttons.
- - - - -
buttons
Publicidad
