IPC ML CMP D1915P T Manual De Instrucciones página 22

- Use of the high pressure washer must be
assessed according to the area where the
washing will be done (e.g.: food companies,
pharmaceutical companies, etc.).
The relative safety standards and conditions
must be respected.
- Do not aim the jet at yourself or others to
clean clothing or footwear.
- Blocking the lance trigger (lever) in the de-
livery position during operation is prohibited.
- Before cleaning and/or maintenance, di-
sconnect the high pressure washer from the
mains electricity and water supply.
- Periodically, at least once a year, have the
safety devices inspected by an authorised
technical service centre.
- If the machine is used in a closed room,
install a fume extraction system and ensure
the room is adequately ventilated.
- Never obstruct ventilation and heat disper-
sion slits.
- Do not use the high pressure washer if the
power cable is damaged.
If the cable is damaged, have it replaced by
an authorised technical service centre only.
The power cable must not be replaced by
the user.
- The power cable must never be placed un-
der mechanical stress. It must be protected
against accidental crushing.
- The following fundamental rules must
be observed when using any electrical
equipment:
• do not touch the appliance with the hands
or feet
• do not use the equipment in bare feet or
English
with unsuitable clothing;
• do not pull the power cable or the applian-
ce itself to unplug the plug from the mains
socket.
(for high pressure washers with a power
rating of less than 3 kW fitted with a plug).
- In the event of malfunction and/or poor
operation of the high pressure washer, turn
it off, disconnect it from the mains electricity
supply using the omnipolar switch (or in the
case of high pressure washers with a power
rating of less than 3 kW by unplugging from
the mains socket) and disconnect from the
water supply. Do not tamper.
The high pressure washer is classified as
a Class I appliance for protection against
electric shock.
Contact an authorised technical service
centre.
Failure to respect the above absolves
the Manufacturer of all liability and repre-
sents negligent use of the product.
- 19 -