Publicidad
Idiomas disponibles
Idiomas disponibles
SUPPORT
TUBE ASSEMBLY
MAKE CERTAIN THE DUST COLLECTOR
IS
DISCONNECTED
FROM THE POWER SOURCE.
Fig. 8
A
iNTAKE
FUNNEL
ASSEMBLY
MAKE CERTAIN THE DUST COLLECTOR
IS
DISCONNECTED
FROM THE POWER SOURCE.
Fig. 10
A
1.
Place support tube clamp (A) over lower support
tube holder (B). See figure 8.
Fig. 9
\
B
1. Align the two holes in the intake support brace (A)
with the two holes in the intake funnel (B).
See figure 10.
2.
Insert two M8 x 20 button head carriage bolts
through the inside of the intake funnel and intake
support brace.
3.
Place a M8 flange hex nut onto the button
head carriage bolts and tighten securely.
2.
Insert the lower support tube (C) into the lower
support tube holder and tighten support tube clamp.
See figure 9.
3.
Place support tube clamp over top of lower support tube.
11
Publicidad
