Publicidad
Idiomas disponibles
Idiomas disponibles
4. Height adjustment:
Before the customer sits down, put the chair in the lowest position:
➢ Press foot switch
ATTENTION: before actuating the foot switch, make sure that no objects such as
supporting cushion, handbags, etc. are standing close to the shampoo stations or are leaning
against it!! This can lead to damage to the shampoo station and the objects!!
➢ Extend the legrest using the remote control.
Set your personal, ergonomically optimal working height:
➢ Press the right foot switch (+) until the ergonomically optimal working height is reached.
ATTENTION:
➢ After the end of the treatment, bring the chair back into the lowest position, only then fully
retract the leg rest!
➢ Risk of injury! Customer may only get up when the chair is in the lowest position!
5.
Accessories
• Seat cover
(Fig. 6)
To protect the upholstery you can lay a cover over the back of the seat.
6. Variants of the power supply
a. Direct wiring (230V/50Hz AC)
• The electrically operated leg rest is connected via a transformer/control unit with a power cable
supplied by the customer.
• Connection to the power supply must be made only by a qualified electrician!
b. Power supply (230V/50Hz AC)
• The electrically operated leg rest is plugged into a cover protected socket supplied by the
customer via a transformer/control unit with an external power cable.
• Optional: Cable conduit for floor anchoring
supply cable from the wash unit through the conduit to the socket.
(Fig. 3)
(Fig. 8)
on the left (-)
GB
(Fig. 7)
to reduce risk of tripping. Lay the power
3
Publicidad
