Fig. 6 to 8
2
nd
– Side plates
rd
3
– Ceramic flame defletor
At the end of the intervention, the parts must
be assembled in the reverse order of their
removal.
After a prolonged period without using your
appliance, and before starting it again, you must
check if there is no obstruction in the chimney.
3.8. SPARE PARTS AND MODIFICATIONS
If you need to replace any part of your Flamebox
equipment, we recommend that you only use
original parts. You can purchase original parts from
your Flamebox installer.
The use of non-original parts, as well as
modifications or alterations to the intended use of
Flamebox
equipment,
Therefore, all modifications to Flamebox products
that are not previously authorized in writing by
Flamebox, are prohibited.
1
st
– Wood retainer
4
th
– Metallic
deflectors
voids
the
warranty.
4.
OPTIONAL EXTRAS
Flamebox has a set of options that you can
purchase from your Flamebox installer.
Touch controller - Allows ventilation regulation in
5 speeds. This option must be pre-installed at the
factory.
RACK Module – Firewood rack to attach
underneath the stove. It is supplied with adjustable
feet and stainless-steel inner plate. It is available for
Cubebox 7, 8 and 10 models. Height 38cm.
Vertical RACK Module – Firewood rack to attach
laterally to the stove. It is supplied with adjustable
feet and stainless-steel inner plate. It is compatible
with Cubebox 7, 8 and 10 models with RACK.
EN
P a g e |
39