Athena GET SX1 CONTROLLER Guia página 5

D. OPERATION OF SX1 CONTROLLER
SX1 CONTROLLER has two operating modes: RACE MODE and TRAINING MODE.
- RACE MODE: once the motorbike is started, SX1 CONTROLLER will quickly and automatically check
the operation of all LEDs. All functions are active, except for the Hi-Temp overheating alarm;
- TRAINING MODE: once the motorbike is started, SX1 CONTROLLER will automatically check the
operating status. All functions are active.
The device is initially set to RACE MODE: it is possible to change the operating mode using SX1
CONNECT with the free WiGET app or with the GET Maya programming software (sold separately).
FUNCTION SETTINGS
Map Selection
MAP 1
MAP 2
To choose the desired
mapping, briefly press
the highlighted
selection buttons (MAP 1
or MAP 2).
When MAP 1 is selected,
the triangle and the three
map upper LEDs indicated will
light up in BLUE.
5
When MAP 2 is selected,
the triangle and the three
lower LEDs indicated will
light up in PURPLE.
EN