Num'axes PIE1061 Manual De Instrucciones página 29

IR LED brightness
Timer
PHOTO MENU
Photo resolution
Multi-shot
Settings
Photo resolution
‒ can more easily detect a difference between body
heat and outdoor temperature;
‒ can more easily trigger the camera.
In high temperature environment, subjects body heat
and environment temperature are hard to tell by the
camera, the suggested setting is high.
However, it is recommended to use low PIR sensitivity in
environments with lots of interference like hot wind,
smoke, near window, etc. This will prevent untimely
triggering.
Auto | High | Low
This parameter allows you to adjust the brightness of the
infrared flash.
OFF | ON
Each day, the camera can work 24 hours a day
(parameter set to OFF) or only during the user set time
period(s). Two different periods can be programmed.
Select "ON" then press OK to set the start time and end
time of the desired working period(s).
Example: If "Timer 1 – Start" is 15:00 and "Timer 1 – End"
is 18:00; each day, the camera will work only between
15h00 (03:00 PM) and 18h00 (06:00 PM).
The "Timer" feature can work together with the "Time
Lapse" feature.
8 M
1
Programmable options
(default settings in bold characters)
24 MP | 16 MP | 8 MP |4 MP | 2 MP
Higher resolution produces better quality photos but
creates larger files that take up more of the memory card
capacity (fills up faster).
Guide PIE1061 – Juillet 2023 – ind. A - 29/112