OHAUS Endeavor 5000 Guia Del Usuario página 4

EN-2
1. SAFETY INFORMATION
Safety notes are marked with signal words and warning symbols. These show safety issues and warnings.
Ignoring the safety notes may lead to personal injury, damage to the instrument, malfunctions and false
results.
WARNING For a hazardous situation with medium risk, possibly resulting in severe injuries or
death if not avoided.
CAUTION For a hazardous situation with low risk, resulting in damage to the device or the
property or in loss of data, or minor or medium injuries if not avoided
ATTENTION For important information about the product. May lead to equipment damage if not
avoided.
NOTE For useful information about the product.
Warning Symbols
General hazard
Safety Precautions
CAUTION: Read all safety warnings before installing, making connections, or servicing this
equipment. Failure to comply with these warnings could result in personal injury and/or
property damage. Retain all instructions for future reference.
Always operate unit on a level surface for best performance and maximum safety
DO NOT lift unit by the tray.
Disconnect unit from the power supply prior to maintenance and servicing.
Spills should be removed promptly.
DO NOT immerse the unit for cleaning.
DO NOT operate the unit if it shows signs of electrical or mechanical damage.
WARNING! The protection provided by the unit may be impaired if used with accessories not
provided or recommended by the manufacturer or used in a manner not specified by the
manufacturer.
WARNING! DO NOT use the unit in a hazardous atmosphere or with hazardous materials for
which the unit was not designed.
CAUTION: To avoid electrical shock, completely cut of power to the unit by disconnecting the
power cord from the unit or unplugging from the wall outlet.
Earth Ground – Protective Conductor Terminal
Alternating Current
Intended Use
This instrument is intended for use in laboratories. It must only be used for processing materials as
described in these operating instructions. Any other type of use and operation beyond the limits of technical
specifications, without written consent from OHAUS, is considered as not intended. This instrument
complies with current industry standards and the recognized safety regulations; however, it can constitute a
hazard in use. If the instrument is not used according to these operating instructions, the intended protection
provided by the instrument may be impaired.
Endeavor
Electric shock hazard
TM
Light Duty Shaker