Publicidad
Idiomas disponibles
Idiomas disponibles
(1) Plug-in and indicator check: Insert the plug into the appropriate socket and verify all
indicators are off. Additionally, ensure the steam release switch and child safety lock
are turned off, preventing accidental spraying of water or steam.
(2) Push down the heating switch ⑦ to turn on the heater. The heating power switch
indicator will light up, meaning the heater has started working.
(3) Ready for use: Once the pressure indicator ⑤ lights up, it means the steam has
reached the set pressure and temperature - the appliance is ready for use.
4.2 Cleaning:
Before proceeding with cleaning, perform a trial test in a concealed area using an object
that can withstand high temperature and humidity.
- Open child security lock ⑧.
- Push the steam release switch ⑨
- Spray steam for cleaning.
When the volume of steam decreases and the buzzer sounds, this means there is a
shortage of water - add more water into the boiler.
Caution during cleaning:
! To prevent electric shock, do not clean electrical appliances.
! To prevent scalding, do not clean chemical fibres or silk.
! When cleaning windows during winter, keep the jet nozzle 30cm away from the glass at
first - this preheats the glass and prevents it from cracking.
4.3. Fill water for continuous use:
! Before opening the safety valve and filling the appliance with water, ensure there is no
steam left and the pressure in the boiler is released. Note: The safety valve cannot open
when there is pressure in the boiler – this is a special safety design. Always prioritise
safety when using this appliance.
Operation methods: Push down the steam release switch to release the steam until it runs
out completely. After the steam has been released, turn off the steam release switch.
Open the safety valve (valve ②). Be cautious of surplus heat that may be released when
opening it.
! When the buzzer sounds, follow the instructions in section 4.3 to fill water into the
appliance accordingly. Then, follow the instructions in section 4.1 to restart the
appliance.
4.4. Turning off
To turn off the appliance, switch off the power and push the press release switch to
release any remaining steam. Then, turn off the stream release switch, unplug the
appliance and entwine the cable around the cable discal. Let the appliance cool down,
wipe it and then store in a dry location.
III. Storage
! Never cover this appliance immediately after use.
! Keep this appliance away from any heat source including open flames, stoves and direct
sunlight.
! When not in use, keep the appliance in a dry location with good ventilation.
Waste electrical products should not be disposed of with household waste.
Please recycle where facilities exist. Check with your local authority or retailer
for recycling advice.
When replacing old appliances with new ones, the retailer is legally obligated
to take back your old appliance for disposal free of charge.
Publicidad
