Publicidad
Idiomas disponibles
Idiomas disponibles
HOWTO USEYOUR PRESSURE WASHER
If you haveany problems operating your pressure washer,
please calI the pressure washer heipline at 1-800-222-3136.
Pressure Washer Location
WANNING
Exhaustheat/gases can ignite combustibbs,
structures or damage fuei tank causing a fire.
o Keepat least5 ft. (152 crn)clearance on all sidesof pressure
washerincluding o verhead.
Pressure WasherClearance
Mace pressure wa@er outdoors in an area that wiii not
accumulate deadiy exhaust gas. DO NOT piace pressure
washer where exhaust gas (A) could accumulate and enter
inside or be drawn into a potentiaily occupied buiiding.
Ensureexhaust gas is kept away from any windows, doors,
ventiiation intakes, or other openings that can aliow exhaust
gas to coiiect in a confined area. Prevaiiingwinds and air
currents should be taken into consideration when positioning
pressure washer.
WARNING
Running engine gives off carbon monoxide, an
odorless, coiorless, poison gas.
_
reathing carbon monoxide can cause headache,
fatigue, dizziness, vomiting, confusion, seizures,
nausea, fainting or death.
* Operate pressure washerONLYoutdoors.
o Keepexhaustgasfrom enteringa confinedareathrough
windows,doors,ventilationintakes, o r otheropenings.
* DONOT eta1 or run engineindoorsor in an enclosed area,
evenif windowsanddoorsare open.
To Start Yeur Pressure Washer
To start your engine-powered pressure washer for the first
time, foiiow these instructions step-by-step. This information
also applies whenever you start the engine after you have let
the pressure washer sit idle for at bast a day.
1.
Piacepressure washer near an outside water source
capable of supplying water at a flow rate greater than
3.8 gaiions per minute and no iess than 20 PSi at
pressure washer end of garden hose.
2.
Checkthat high pressure hose is tightiy connected to
spray gun, reel and pump. See Assemb_for
illustrations.
3.
Make sure unit is in a ievei position.
4.
Connectgarden hose to water intet on pressure washer
pump.
i
NOTlC(
DO NOT run the pump without the water supply connected
and turned on.
L
amageto equipment r esultingfrom failureto followthis
instructionwill void warrasty
5.
Uncoii high pressure hose from hose reel compbteiy
before using pressure washer.
6.
Turn ONthe water, press red button (A) on the gun and
squeezethe trigger to purge the pump system of air and
impurities.
Attach nozzleextension to spray gun. Tigllten by hand.
Choose ProjectPro_ nozzle you want to use, pull back on
coilar of nozzleextension, insert nozzle and release
coiiar. Tug on nozzle to make sure it is securely in place.
See How to Use ProjectPro_ Nozzle System.
12
Publicidad
