Publicidad
Idiomas disponibles
Idiomas disponibles
WARNING
Contact with muffler area can result in serious
burns.
Exhaustheat/gases can ignite combustibles,
structures or damage fuel tank causing a fire.
* DONOT touch hot partsandAVOIDhot exhaustgases.
* Allowequipment t o cool beforetouching.
o Keepat least5 feet (152crn) of clearance on all sidesof
pressure washerincludingoverhead.
, Codeof Federal R egulation (CFR) T itle 36 Parks,Forests, a nd
PublicPropertyrequireequipment p oweredby an internal
combustion engineto havea sparkarrester,rnaintained in
effectiveworkingorder,complyingto USDA Forestservice
standard 5!00-1C or laterrevision.Itsthe Stateof California a
sparkarresteris required undersection4442 of the California
Publicresources code.Otherstatesrnayhavesimilar laws.
How to Stop Your Pressure Washer
1.
Reieasespray gun trigger and let engine idte for two
minutes.
2.
Move ON/OFFswitch to OFF position.
WARNING
Backfire, fire or engine damagecould occur.
* DONOTstopenginebymovingchokeleverto "Choke"position.
3.
ALWAYSpoint spray gun in a safe direction, press red
button and squeeze spray gun trigger to releaseretained
high water pressure.
WARNING
The high pressure stream of water that this
equipment produces can cut through skin and its
_
nderlying tissues, ieading to serious injury and
)ossibb amputation.
Spray gun traps high water pressure, even when
engine is stopped and water is disconnected,
which can cause injury.
• Keephigh pressurehoseconnected to reel andspraygun while
systemis pressurized.
o ALWAYS pointspraygun in safedirection,pressred button
and squeeze spraygun trigger,to rebasehigh pressure, e very
time youstop engine.
JNIPORTANT: S pray gun traps high water pressure, even
when engine is stopped and water is disconnected.
How to Use Accessory Tray
The unit is equipped with an accessorytray with piacesto
store your ProjectPro _ nozzles, HydroFoam
TM
iauncher, spray-
gun wireform to hold the spray gun and nozzteextension.
identify ali accessories with the iiiustration on page 6.
NOTE:The extra hob in the tray is for storing a utiiity brush.
The extra clip in the tray is for storing a turbo nozzle. The
brush and turbo nozzle are NOT included with your pressure
washer. You can buy these items as optionai accessories.
1.
Piacespray gun and nozzle extension into spray gun
holder wireform, as shown.
2.
Coii high pressure hose onto hose reel.
3.
Insert muiti-colored ProjectPro_ nozzles in spaces
provided in accessory tray.
4.
Insert HydroFoam
TM
iauncher in space provided in
accessory tray next to the multi-colored ProjectPro_
nozzles.
How to Hoe ProjectPro ® Hozzle System
The quick-connect on the nozzle extension atiows you to
switch between three different ProjectPro_ system nozzles.
ProjectPrd_ nozzles can be changed while pressure washer is
running once spray gun trigger Iock is engaged.The
ProjectPrd_ nozzles vary the pressure and spray pattern as
shown.
High Pressure
Delicate
General
40°Yeiiow
15° Orange
2650 PSi
3000 PSi
2.8 GPM
2.7 GPM
"--.i- .......l...J
Max
O ° Red
3400 PSi
2.4 GPM
14
Publicidad
