Weidmuller CUTFIX PRO Serie Instrucciones De Uso Originales página 39

5.7 Changing the user type
Each time the machine is switched on, the user type User
is active. Three user types with different permissions are
created in the operating software.
User type Permissions
User
– operating the machine
Setter
– setting the machine
– setting the feeder
– creating jobs and projects
– displaying the error list
– changing the rights of users
access code 1212
Service
– adjusting the machine
– adjusting the feeder
– perfoming service work
– changing the rights of users and
setters
access code of the Weidmüller country
representative
► Open the menu User.
A thin coloured frame on the display indicates the
active user type: User (orange), Setter (yellow)
or Service (red).
Figure 5.9 Menu User
► Tap the user type you want to activate.
► Enter the required access code.
► If neccessary, adapt the reset-setting.
► If you want to change the user rights, tap the gear icon
and see chapter 5.8.
► Leave the menu.
If you do not adapt the reset-setting, the user types Setter
and Service only remain active for 10 minutes at a time,
after which the type User is automatically set again.
2819930000/02/06.2022
5.8 Changing the user rights
The user types Setter and Service can change the rights
of the other users. As Setter you can change the rights of
the user type User. As Service you can change the rights
of the user typse User and Setter.
► In the menu User, tap the gear icon, see Figure 5.9.
The current rights of the adjustable user types are displa-
yed.
Figure 5.10 User rights
► Enable or disable the desired functions.
► Leave the menu.
Setting up the machine
39