GE Profile 23 Manual Del Propietario E Instalación página 17

Trimkits and decoratorpanels.
For CustomStyl# Mmodels
Read these instructions completely and carefully.
Before YouBegin
Some models are equipped with trim kits that aflow you to instafl door panels. You can order
pre-cut black, white, bisque or stainless steel decorator panels from GE Parts and Accessories,
800.626.2002, or you can add wood panels to match your kitchen cabinets.
Panels less than 1/4" (6 mm) thick
\._l_en installing wood panels less than 1/4" (6 ram) thick, you need to create a filler panel, such as 1/8"
(3 ram) cardboard, that will fit between the ti_ce of the door and the wood panel. If you are installing the
pre-cut decorator panels, pre-cut filler panels are included in the kit. The combined thickness of the
decorator or wood panel and the filler panel should be 1/4" (6 ram).
Panels 1/4" (6 mm) thick or less
I/4"(6 mm) Max.
3/4" (19 mm) or Raised Panel
3/4 (l .) ram) umted board
A raised I)anel design, screwed or _,,lued to a l/4" (6 ram) thick backing, or a " (
can be tlsed. The _isecl i)ortion of the panel illtlst be thb_icated to i)emfit clearances of at least 2" (5.1 cm)
fl'om the handle side fin" fingertip clearance.
Panels thicker than 1/4" (6 ram), up to./4 (l 9 ram) ma_mum, will require that the outer :)/16
(8 ram) of panel perimeter be no thicker than 1/4" (6 ram).
Weight limitations for custompanels:
Fresh Food38 Ibs. (17kg) max.
FreezerDoor28 Ibs. (13kg) max.
Panels thicker than 1/4" (6 mm)
5/16" (8 turn)
1/4" (6 mm)
ThickBacking
2"(5.1 cm) I lllll __
ili[11
I -''- Refrige rater
Door
17