GE Profile 23 Manual Del Propietario E Instalación página 5

About the temperaturecontrols.
GEAppliances.com
The temperature controls are preset in the factory at 5 for both
the refrigerator and freezer compartments. Allow 24 hours for the
temperature to stabilize to the preset recommended settings.
Several adjustments may be required. Each time you adjust
controls, allow 24 hours for the refrigerator to reach the setting
you have selected.
Setting either or both controls to 0 stops cooling in both the freezer
and refrigerator compartments, but does not shut off electrical power
to the refrigerator.
Control settings will vary based on personal preferences, usage and
operating conditions and may require more than one adjustment.
NOTE: The refrigerator is shipped with protective film covering the
temperature controls. If this film was not removed during installation,
remove it now.
Performance Air Flow System
The Perfbmmnce ,&Jr How System is designed to ma_mize temperature control in the refrigerator and
fl'eezer compartments. This tmique spedal tbatm'e consists of the _r Tower along the back wall of the
reli_gerator and the Air Ttmnel on the bottom portion of the fl'eezer rear wall. Placing food in fl'ont of the
lou\'e_ on these components will not affect pe_fimnance. Although the Ah" Tower and the Air Ttmnel can
be removed, doing so will afl_'ct temperature performance. (For remox:fl instructions, on-line, 24 horns a
day, contact us at GEAppliances.com or call 800.GE.CARES. In Canada, contact us at geappliances.ca or
call 1.800.361.3400.)