san ignacio 39204 Manual De Instrucciones página 11

• STEP 1: Mount the sealing ring and the blade base. Then install the mounting base
into the jar base as shown in picture 1, and then turn the mounting base locked.
• STEP 2: Put the glass jar assembly onto the main body as shown in picture 2, then
you can put some foods to process into the glass jar (e.g. mixture of carrots and
water). CAUTION: The maximum capacity of the mixture must not exceed the indi-
cated capacity on the glass jar (1800 ml).
CAUTION: DO NOT USE THE UNIT WITHOUT ANY LIQUID INSIDE THE GLASS JAR.
• STEP 3: Put the jar lid and the measuring cup into the glass jar as shown in picture
3.
3. After finishing the step 3, you can plug the appliance and use it.
4. Tu turn on, switch the button to the ON symbol, then you can see blue lights on the
device that mean the blender is ready to work.
5. This unit has a safety design. It does not work if the glass jar is not installed on the
main body properly.
Installation diagram:
OPERATION
1. The blender is used to blend food including fruits, vegetables, ice cubes, etc. Before
blending, you must cut the food into slices of near 10-15mm. If needed, please peel the
skin. If you want to blend carrots, you should add some water into the glass jar at the
same time (if you want to blend carrots a its maximal capacity, use 720g of carrtos and