Publicidad
Idiomas disponibles
Idiomas disponibles
2 - INSTALLATION
•
After removing the packaging, check that the appliance is in perfect condition;
in case of doubts do not use it and refer to professionally qualified personnel.
2.1 - FLOOR INSTALLATION (Fig.4)
•
Rotate the appliance upside down.
Position the appliance on a flat and stable surface, making sure it does
not spoil or fall. Position a soft cloth between the bearing surface and
the appliance to protect the surfaces.
•
Place the feet (6) on the appliance body (1).
•
Fix the feet (6) with the specific screws (7).
Make sure the feet are mounted correctly.
•
Entirely straighten the power cord.
2.2 - WALL INSTALLATION
•
Before proceeding with the wall installation, make sure that:
- The appliance is not exposed to sources of heat or steam.
- Make sure the space between the roof and the appliance is not lower
than 1m (figure 1).
- The appliance must be installed at a minimum height of 15 cm from the
floor (figure 1).
- The wall on which it is intended to fix the internal unit must be stable, solid
and suitable to bear its weight.
- There must be no obstacles for free circulation of air both from the intake
side and especially from the air outlet side.
- The appliance must not be installed directly onto a household appliance
(TV, radio, fridge, etc.) or on a source of heat.
•
After checking what has been previously described, proceed with the
mounting of the fixing bracket (Fig.5):
- Position the bracket (3) against the wall.
- Mark the drilling points making sure drilling is levelled.
- Drill the necessary holes using a tip suitable for the wall to be drilled.
EN - 9
CALEO GLASS
Publicidad
