Publicidad
Idiomas disponibles
Idiomas disponibles
Make sure that in the drilling area there are no pipelines or
electrical conduits.
- Insert the dowels (7a) in the holes and fix the bracket (3) to the wall using
the supplied screws (7b - 7c) (figure 5).
Using a spirit level, make sure the fixing bracket (3) is levelled.
- Check stability of the bracket (3) moving it laterally and vertically.
- Position the appliance (1) in correspondence of the hooks (3a) of the
bracket (3).
- Lock the appliance (1) to the bracket (3) by making the hooks (3a) trigger.
Try to move the appliance vertically and laterally to make sure it is hooked
safely.
- Tighten the screws (7d) positioned in the upper part of the bracket (3) as
shown in figure 5.
•
Make sure that curtains or other objects do not obstruct the air flow (fig. 2).
•
Connect the plug to the power socket.
Make sure the mains data correspond to what is indicated on the
appliance nameplate. Place the cord in non-transitional areas so
as to avoid tripping.
3 - USE OF THE APPLIANCE
The appliance operating modes can be selected either using the remote control
supplied or the control panel.
The reception of the selected function is confirmed by the emission of a "beep"
by the buzzer.
EN - 10
Publicidad
