Garant ST2 Manual De Uso página 71

Print options
Save job
Load job
Load profile
Load result
Bluetooth / Duplex
Off
Use Bluetooth
Duplex
Accessories
No printer
USB printer
Bluetooth printer
Print record texts
Print profile
xxx.mqe
...
xxx.mqe
...
xxx.x3p
...
xxx.mqep
...
Connect to app
Connect to an HID
HID output format
- Language dependent
- Point
- Comma
QR code
If the settings are correct, printing can
proceed by tapping the print key.
Select printer type.
With a "Bluetooth printer", the detected
printer is displayed underneath.
The activated profile information is prin-
ted at the start of the record.
The profile is printed at the end of the
record.
Saves the current settings (measuring
conditions, evaluation conditions, para-
meters, tolerance limits, profile options,
export settings) as a job (e.g. "set-
tings_1.mqe"). If necessary, change the
file name.
Tapping an MQE file (e.g. "set-
tings_1.mqe") loads the saved job
(measuring conditions, evaluation con-
ditions, parameters, tolerance limits,
profile options, export settings).
If a loaded job is changed, it will be dis-
played with an "*" at the end. To obtain
the original job again, it must be re-
loaded. If the changed job is to be saved
under a new name, follow the same
steps as under "Save job".
Tapping an X3P file loads the saved pro-
file (D profile) for a new evaluation.
Tapping an MQEP file loads the saved
profile with results (filtered profiles with
the results, measuring conditions, eval-
uation conditions) for a new evaluation
Bluetooth and Duplex interface is
switched off.
Device becomes visible and can be
paired via Bluetooth.
Connect to app: For connection with a
smartphone via HCT app.
Connect to an HID: For connection with
a computer
After you have finished use with an HID,
the HID connection must be terminated
under Bluetooth settings > "Other
devices/mouse, keyboard and pen".
Sets the display of decimal separators
on the HID device.
For remote control via software
For "MarCom Professional", see Trans-
ferring measuring results with "MarCom
Professional" software [} Page 73].
After scanning the QR code, compatible
accessories are displayed
www.hoffmann-group.com
de
bg
da
en
fi
fr
it
hr
lt
nl
no
pl
pt
ro
sv
sk
sl
es
cs
hu
71