Publicidad
Idiomas disponibles
Idiomas disponibles
12
Notice code
• Notice code is a function only in TU2C-LINK communication.
• When the outdoor or indoor unit detects its conditions requiring caution or maintenance, this function notices you to
check your units with the spanner mark (Notice code mark) on the wired remote control or central control display.
• Even while the notice code mark is displayed, the air conditioner can operate normally.
• A maximum of 10 notice codes can be issued simultaneously in one system (line).
■
Notice history
Displays the last 10 notice codes, and at which unit and when they occurred.
NOTE
The notice history data shows a history of 10 occurrences. If the occurrences exceed 10, the oldest data is
deleted.
Deleting notice history
REQUIREMENT
If you are using 2 remote control, delete the history at each remote control.
39-EN
1140902101_EN FR ES.indb 20
1140902101_EN FR ES.indb 20
1
Push [
Menu] to open the "Menu"
2
Push and hold [
Menu] and [
] at the
same time to open "Field setting menu"
Push and hold 4 seconds.
3
In the "Field setting menu" screen, push
[
] and [
] to select "Notice history",
and then push [
Set/Fix)
1
Push [
Menu] while the "Notice history"
screen is displayed
"Reset all notice data." is displayed.
2
Push [
Set/Fix]
– 20 –
EN
FR
ES
40-EN
11/14/23 7:08 PM
11/14/23 7:08 PM
Publicidad
