Publicidad
Idiomas disponibles
Idiomas disponibles
OVERVIEW
Install the home station. (page 13)
1
Insert the power cord plug into an outlet and locate the
station against a wall. If power is not supplied to the
home station, the HOM-BOT will not charge.
Turn on the power supply of the HOM-BOT. (page 14)
2
Turn on the power switch located on the bottom of the
HOM-BOT and press the upper START/STOP button to
turn on the power supply.
* If the power supply is not turned on, refer to page 14.
Start cleaning. (page 15)
3
Press the START/STOP button once again while the
HOM-BOT is turned on. You will hear the sound of clean-
ing and cleaning will begin.
Automatic charge. (page 16-17)
4
The HOM-BOT will self-diagnose and automatically re-
turn to the home station to recharge before the complete
discharge of the battery. It can take up to three hours to
charge the battery.
Use cleaning methods and auxiliary functions. (page 18~21)
5
With remote controller, cleaning method can be selected
and auxiliary function can be used. For cleaning methods,
zigzag cleaning or spatial expansion cleaning can be se-
lected, and for auxiliary functions, manual cleaning, spot,
timer function, and ultra microfiber mop cleaning can be
used.
12
Publicidad
