Publicidad
Idiomas disponibles
Idiomas disponibles
3. INSTALLATION INSTRUCTIONS
Location
When selecting a position for your refrigerated showcase you should make sure the
floor is flat and firm, and the room is well ventilated. Avoid locating your refrigerated
showcase near a heat source, eg, cooker, boiler or radiator. Also, avoid direct sunlight
in out-buildings or sun lounges. If you are placing your refrigerated showcase in an
out-building such as a garage or annex ensure that the Refrigerated showcase is
placed above the damp course, otherwise condensation will occur on the cabinet.
Never place the refrigerated showcase in a wall recessed or into fitted cabinets or
furniture when your refrigerated showcase is working, the grille at the back may
become hot and the sides warm.
It must therefore be installed so that the back and the sides of the appliance has
enough space for ventilation around the appliance. This refrigerating appliance is not
intended to be used as a built in
Appliance.
Location conditions:
An average ambient temperature must be observed. This temperature is specific
according to the climatic class of the device:
Climatic class
CC1
CC2
CC3
Your appliance is of climate class CC1 (maximum temperature and humidity are equal
to +25°C and 60% ambient humidity). This climatic class is indicated on the rating
label located inside your showcase.
Cleaning before use
Wipe the inside of the refrigerated showcase with a weak solution of bicarbonate of
soda. Then rinse with warm water using a damp sponge or cloth. Wash the baskets
and shelves in warm soapy water and dry completely before replacing in the
refrigerated showcase.
Before plugging in
Check that you have a socket which is compatible with the plug supplied with the
refrigerated showcase.
Maximum ambient
temperature
25°C
32°C
40°C
22
Maximum ambient
humidity
60%
65%
75%
Publicidad
