Publicidad
Idiomas disponibles
Idiomas disponibles
Keep the showcase steady to avoid vibration and noise.
The showcase should be installed in a well-ventilated area. A space of at least 10 cm
must be maintained between the surrounding wall and the wall of the cabinet and the
top panel for air circulation. Do not place any object on the top panel.
It should be placed away from heating resources and not under direct sunshine to
maintain refrigeration efficiency.
Install the beverage cooler in a dry place to avoid rust on the unit, which may affect
the electrical insulation.
▪ Location
Do not place your refrigerator near a heat source, for example. Stove, boiler or
radiator. Also, avoid direct sunlight.
▪ Do not turn on the refrigerator for 4 hours
After any movement, it must not be connected for 4 hours. This delay allows the
coolant to be adjusted.
▪ Installation
Let your device breathe. Heat is released from the walls so it is important to leave a
circulation of air around your device.
Recommendation combination
The following combination of drawers, baskets, and shelves is recommended for
energy to be used as efficiently as possible by the refrigeration unit
Turn off your appliance
▪ If the unit is not likely to operate for a long period of time:
▪ Remove all beverages from your appliance from the refrigerator.
▪ Unplug the appliance.
▪ Clean it thoroughly.
▪
Keep the door open to prevent odors from rising.
6. TROUBLESHOOTING GUIDE
Sometimes you may come cross minor problems that is most cases do not require a
service call and can be easily eliminated. The problem may have resulted from
improper handling and/or installation of the appliance. Please refer to the below
trouble-shooting guide to assist you in identifying the problem still persist after
completing these checkpoints, contact the closest authorize service agent in your
area for assistance.
26
Publicidad
