Descargar Imprimir esta página

Westward 15F203 Instrucciones De Servicio página 3

Publicidad

Idiomas disponibles

Idiomas disponibles

Westward Operating Instructions
GREASING A GREASE FITTING / GREASE NIPPLE
1. The grease coupler provided at the end of the grease
gun hose has a jaw type construction. The coupler
jaws will snap on to a grease fitting and maintain a
tight fit.
2. When connecting the coupler to the grease fitting,
press the coupler straight onto the grease fitting to
form a snug fit. Start operating the grease gun with
the coupler as square to the grease fitting as possible.
3. Once greasing is completed, slightly tilt the coupler,
twist and pull back. The tilt and twist action will allow
easy removal of the coupler from the grease fitting.
MAINTENANCE
Grease gun and its hose should be kept clean and checked for damage before each use.
TROUBLESHOOTING
Problem
Grease gun pumps little or no grease
Excessive grease leaks out from the
back side of the grease gun around
the plunger rod
Grease leaks from the connection
between the grease gun head & the
hose or between hose & coupler
WARRANTY
LIMITED ONE - YEAR WARRANTY
Should this product fail to perform satisfactorily due to a defect or poor workmanship within ONE YEAR from the date of
purchase, return it to the place of purchase and it will be replaced, free of charge. Incidental or consequential damages
are excluded from this warranty.
Manufactured for Grainger International, Inc.
100 Grainger Pkwy., Lake Forest IL 60045 U.S.A
Clear Tube Pistol Grease Gun
Possible Cause
Air is trapped in grease
Blocked hose
Grease too thick or cold
Rubber follower is damaged
Loose Connection
3
To engage,
push straight on
Prime the grease gun as detailed in
the section, THREE WAYS TO LOAD
YOUR GREASE GUN
Remove the hose and operate the
grease gun. If the gun dispenses
grease then the gun is fine and you
need to either clean the hose or re-
place it
Store grease gun and grease away
from extreme cold or use thinner
grease
Replace the grease gun
Tighten the connection using Teflon or
any other Thread Sealant
15F203
To remove,
Tilt, Twist
& Pull
Corrective Action

Publicidad

loading