Samsung 4 Serie Manual Del Usuario página 72

Auto Wall-Mount Adjustment (Soldseparately) (LN32A450C1D, LN37A450C1D, LN40A450C1D)
Once the auto wall mount is installed, your TV's position can be easily adjusted.
TV Rear Panel
EX=LINK Cable (Not supplied
Auto Wall=Mount
Entering_ the menu
.
Press the A., _', 4 or I_ button on your remote control.
:_ The Wall Mount Adjustment screen is displayed.
>- If the Wall Mount Adjustment screen is not displayed when clicking on a direction
button while watching your TV, use the menu to display that screen.
• Press the MENU butt on to display the menu. Press the A or 'V' button to select
"Setup", then press the ENTER O,,-'button.
• Press the A or V button to select "External Settings", then press the ENTER
button.
• Press the A or V" button to select "Wall-Mount Adjustment", then press the
ENTER _ button.
Remembering the Position
2. Adjust to the desired position using the A,T,4,1_ buttons.
>- If you press an arrow button when no OSD is displayed on the TV screen, the
Adjustment screen appears.
Press the INFO button to reset. Press the 4 or I_ button to select "Yes", then
press the ENTER _ button.
The position is initialized to the default setting.
3. Press the blue button.
Press the A and T buttons to select a save mode from either Position 1,
Position 2 or Position 3 in order to save the current position.
To not save the current position, press the RETURN button.
:_ When selecting a save mode, you cannot use the Color buttons.
4. Press the ENTER I:_ button to save.
>_ When Position1 is selected, the message "Current position saved as Position1" is
displayed.
5. Press the ENTER _ button.
The saved Position appears on the left side of the OSD.
Moving to the remembered position
1. Complete Step 1 of"Entering the menu".
2. Pressing a Color (Red, Green, Yellow) button moves the auto wall mount to the
saved position.
:_ You can move the wall mount to one of the 3 pre-set positions by pressing the
Red (Position 1), Green (Position 2) or Yellow (Position 3) buttons.
:_ If you adjust the position after moving to a pre-set position, the position display wilt
disappear.
>- For installation, refer to the Installation Manual provided with the wall mount.
>- For product installation and the installation and moving of the wall mount, make sure to consult a specialized installation
company.
This installation manual is to be used when attaching the wall mount to a wall. When attaching to other building materials,
please contact your nearest dealer.
:_ The auto wall mount wilt not work when Anynet ÷ is operating.
>_ LN37A450C1D and LN40A450C1D models are not compatible with the older wall mount model (WMN5090A).