WALCOM 360 TRUE LIGHT EVO Instrucciones página 8

PARTS (fig. 1) Components list:
Item Spare part code
1 -
2 -
3 -
4 -
5 -
6 -
7 90242-A
(8) 90242-B
(9) 90242-C
(10) 90242-D
(11) 90242-E
12 90240
TECHNICAL DATA
Operating temperature
Maximum weight with battery inserted
Internal diameter reductions
(refer to the link indicated in section 3.
Installation for the relevant reduction/spraygun
association)
Luminous flux (range)
Color temperature
CRI
Internal battery
Charging time
(from completely discharged battery)
Average number of complete charging cycles
CLEANING
IT IS FORBIDDEN to soak the 360 TRUE LIGHT EVO light, the battery, and spare parts (rubber
adapters and glass) in liquids, such as solvents/cleaning solutions/water, etc.
Immediately at the end of the application, clean the residues/dust deposited only on the surface
parts, before they are catalysed, using NON-ABRASIVE cloths damp with neutral pH detergent
solutions. Do not use acids, caustic solutions, bases, paint strippers, unsuitable regenerators
or other aggressive detergents. Do not use abrasive products or damp cloths containing acids,
alkaline solutions or petrol.
EN
Decription
Body with LED and EVO board
EVO lid
USB gasket/cap and EVO button
Lithium battery 18650 35E - 3400 mAh
Quickly M2. 5x20
Quickly 2.2x9
Rubber adapter A
Rubber adapter B
Rubber adapter C
Rubber adapter D
Rubber adapter E
External protective glass
(fig. 1)
8
0° C +35°C
156 g
A= 42.5 mm
E= 41.5 mm
B= 40 mm
C= 36.5 mm
D= 33 mm
200 ÷ 600 lumen
6500 K
>= 97 CRI at maximum light intensity
Li-Ion, 18650, 3400 mAh
4/6 hours (with 5V power supply and at
least 1 A)
300 ÷ 500