Airzone Aidoo Zigbee AZAI6ZBE Serie Manual De Instrucciones página 9

CONFIGURATION
ADD/REMOVE AIDOO ZIGBEE INTO A ZIGBEE NETWORK
The Aidoo Zigbee uses the Zigbee 3.0 standard and is compatible with all Zigbee certified
controllers.
Network inclusion
If the Aidoo Zigbee has not been included yet into the Zigbee network, the
remain off. The procedure of inclusion is activated by pressing the Association Button
the Network Steering Mode in the Aidoo Zigbee. As soon as the inclusion procedure initiates,
the LED remains steady red until the device is included in the network.
When the Aidoo Zigbee has been succesfully included into the Zigbee network, the
will remain steady blue, the Aidoo Zigbee stops broadcasting the device announcement and
starts acting as router of the Zigbee network.
According to the Zigbee 3.0 standard, the
Aidoo Zigbee can be added into a Zigbee
network by scanning the Install QR Code
with a Zigbee controller with 3.0 standard
secure inclusion. The Install Code is a
random value generated at manufacturing
time and used to encrypt the initial
network key transport from the Zigbee
network's controller.
The EUI64, Install Code and pairing QR can
be found on the front side of the Aidoo
Zigbee.
Network exclusion
Only a controller can remove the device from the network. After activating the exclusion
function by the controller, the device can be removed by setting it in Learning Mode.
If the Aidoo Zigbee is already included into the Zigbee network, the
blue. The procedure of exclusion is activated by pressing the Association Button
the exclusion procedure initiates, the LED
the network. Once the Aidoo Zigbee has been succesfully removed from the Zigbee network,
the LED will remain off.
Zigbee EUI64 - Install code
remains steady red until the device is excluded of
LED will
to set
LED
LED will remain steady
. As soon as
EN
9