Emos GS869 Manual Del Usuario página 4

Detector States Overview
State
Self-testing
mode
Adaptation mode
Stand-by mode
Functionality test
Alarm mode
Alarm hush
Faulty gas sensor
End of detector
service life
Detector is off
Detector Description See fig. 1
1 – Loud siren
2 – LEDs
POWER – green colour
FAULT – yellow colour
ALARM – red colour
Installation
The installation must be performed by a qualified person.
The person performing the installation is responsible for installing the product in accordance
with valid regulations.
When in doubt, leave the installation to a qualified professional.
Ideally, the detector should be installed in a room where the risk of gas leaks is the greatest,
e.g. the kitchen.
Note Green LED Yellow LED
Upon connection lit for ca. 2
to mains
Ca. 180 seconds
after connection
to mains
Normal gas
detector state
Long-press the
TEST/HUSH
button
Gas detected
Press the TEST/
HUSH button
Replace the
detector
Replace the
detector
Power cable
unplugged from
mains
lit for ca. 2
seconds seconds
flashing off
lit off
lit off
lit off
lit off
lit lit
lit lit
off off
3 – TEST/HUSH button
Used for testing the functioning of the
detector or silencing an alarm
4 – End date of detector service life
4
Red LED Siren
lit for ca. 2
1× beep
seconds
off inactive
off inactive
intermittent
flashing
beeping
intermittent
flashing
beeping
flashing inactive
beeps 1×
off every 30
seconds
beeps 3×
off every 30
seconds
off inactive