TIME AND STATUS DISPLAY
The time and status display shows the estimated time remaining, cycle progress, and door lock status.
O ESTIMATED TIME REMAINING
When the cycle selector knob is pressed, the washer
automatically detects the wash load (weight) and
optimizes the washing time, based on the selected
cycle and options. The display will then indicate the
estimated time remaining for the selected wash cycle.
NOTES:
• The time shown is estimated. For example, the time
displayed may pause for a period of time while the
machine is heating the water or balancing the load.
Under certain conditions, the machine can pause for
extended periods of time.
• Estimated time is based on normal operating
conditions. Several external factors (load size, room
temperature, incoming water temperature, etc.) also
affect the length of estimated time vs. actual time.
_) LOAD-SENSING
INDICATOR
These lights will illuminiate briefly at the beginning of
the cycle after the control has measured the load size.
From one to four lights will be lit depending on the size
of the load. Once the load size has been measured,
the amount of detergent can then be adjusted for
maximum performance.
G
CYCLE STATUS INDICATOR
These status LEDs illuminate to indicate which portion
of the cycle is currently running. A blinking light
indicates the active portion of the cycle. When that
portion is complete, the light will remain steady.
O
DOOR LOCK INDICATOR
Indicates that the door is locked. The washer door will
lock while the washer is operating. The door can be
unlocked by pressing the cycle selector knob to pause
the washer.
NOTES:
• If the temperature
in the washer is too high,
the door cannot be unlocked until the washer
has cooled.
• If the water level is too high, select the DRAIN
& SPIN cycle to drain excess water. Do not try to
force the door open.
18