10. Cleaning and storage
Use an alcohol swab
or cotton swab
moistened with
alcohol (70% Isopropyl)
to clean the
thermometer casing
and the measuring
probe. Ensure that no
liquid enters the
interior of the
thermometer.
Never use abrasive cleaning agents, thinners or benzene for
cleaning and never immerse the instrument in water or ot-
her cleaning liquids.
Take care not to scratch the surface of the LCD. Remove the battery
from the instrument if it is not required for extended periods of time
in order to avoid damage to the thermometer resulting from a lea-
king battery.
The measuring probe must be completely dry before a new
measurement takes place.
Correct measurements are only guaranteed if the measuring
probe is clean and not damaged in any way.
25