Trevi SCD 5725 BT Manual De Uso Y Conexiones página 13

ENGLISH
7. To remove front control panel
Press RELEASE button to release front control panel from unit chassis, then you
can remove it from unit chassis.
When front control panel is removed, the LED indicator on front cabinet flashes.
8. To reset unit
Before operating the unit for the first time, or after replacing the car battery or
changing the connections. You must reset the unit.
To reset the unit, remove the front control panel, then press RESET button with a
cuspidal object.
This operation will erase clock setting and some stored contents.
RADIO OPERATION:
1. To select radio band
Press BAND button briefly and repeatedly to select a desired radio band in
sequence and circulation as follows:
-->FM1-->FM2-->FM3-->AM1(MW1)-->AM2(MW2)->
2. To search for radio station manually or automatically
Press and hold >>| or |<< button for 1 seconds to automatically tune up/down for
a radio station of strong signal.
Press >>| or |<< button briefly to manually tune up/down for your desired radio
stations step by step.
3. To store current station or turn on a preset one
1) Press one of the 6 number buttons and hold for more than 1 second to store the
current station in the preset memory bank of the number button for the current band.
In this way the unit can store 30 preset stations.
2) Press one of the 6 number buttons briefly to turn on the preset station stored in
the preset memory bank of the number button for the current band.
4. To scan for each preset station or auto search for the strongest stations
1) When pressing and holding BAND button for more than 1 second, the radio
searches from the current frequency and checks the signal strength level until the 6
strongest stations are found. And then the 6 strongest stations are preset to the
corresponding preset memory numbered bank. The auto-storage operation is
implemented in the each selected band. When the auto-storage operation is finished,
the radio executes Preset scan.
Page 4
13
SCD 5725 BT
.