Publicidad
Idiomas disponibles
Idiomas disponibles
1. Stop the motor.
2. Do a visual check for damages, for example cracks.
3. Replace the cutting attachment guard if it is
damaged.
Cutting equipment
Select correct cutting equipment and do maintenance on
the cutting equipment to:
•
Get maximum cutting performance.
•
Increase lifetime of the cutting equipment.
WARNING:
attachments with the guards we
recommend! See
page 18 . Refer to the instructions for the
cutting attachment to find the correct way to
load the trimmer line and the correct trimmer
line diameter.
WARNING:
attachment may increase the risk of
accidents.
WARNING:
before you do the work on the cutting
attachment. This continues to rotate after
you release the throttle. Make sure that the
cutting attachment has stopped fully and
disconnect the spark plug cap before you
start the work on it.
Trimmer head
WARNING:
trimmer line is wound tightly and evenly
around the drum to prevent harmful
vibration.
795 - 007 - 06.05.2022
Only use cutting
Approved accessories on
A defective cutting
Always stop the engine
Always make sure the
•
Only use recommended trimmer heads and trimmer
lines.
•
Only use recommended cutting attachments.
•
Smaller machines requires small trimmer heads and
vice versa.
•
The length of the trimmer line is important. A longer
trimmer line requires greater engine power than a
shorter trimmer line of the same diameter.
•
Make sure that the cutter on the trimmer guard
is intact. This cuts the trimmer line to the correct
length.
•
Soak the trimmer line in water for a couple of days
before use to increase the life length.
Battery safety
WARNING:
instructions that follow before you use the
product.
•
Only use the BLi200 battery. Refer to
on page 17 . The battery is software encrypted.
•
Use the BLi200 battery that is rechargable as a
power supply for the related Husqvarna products
only. To prevent injury, do not use the battery as a
power supply for other devices.
•
Risk of electrical shock. Do not connect the battery
terminals to keys, coins, screws or other metal. This
can cause a short circuit of the battery.
•
Do not use non-rechargeable batteries.
•
Do not put objects into the air slots of the battery.
•
Keep the battery away from sunlight, heat or open
flame. The battery can cause burns and/or chemical
burns.
•
Keep the battery away from rain and wet conditions.
•
Keep the battery away from microwaves and high
pressure.
•
Do not try to disassemble or break the battery.
•
If the battery leaks, do not let the liquid touch your
body or eyes. If you have touched the liquid, clean
the area with a large quantity of water and soap, and
get medical aid. If you get liquid in your eyes, do not
rub but flush with water for a minimum of 15 minutes
and get medical aid.
•
Use the battery in temperatures between -10 °C (14
°F) and 40 °C (114 °F).
•
Do not clean the battery or the battery charger with
To clean the product, the battery and
water. Refer to
the battery charger on page 14 .
Read the warning
Technical data
9
Publicidad
