iRobot Roomba j6+ Guia Del Usuario página 12

Cleaning the Full Bin Sensors
1
Remove and empty the bin.
2
Wipe the inner
sensors with
a clean, dry
cloth
3
Wipe the bin door with a clean,
dry cloth.
Closed Door
Opened Door
4
Clear any
debris from the
vacuum path.
Washing the Bin
Important: Do not wash the filter. Remove the
filter before washing the bin.
1
Release the bin, remove the filter, and
open the bin door.
2
Rinse the bin using warm water.
Note: Bin is not dishwasher safe.
3
Make sure that bin is completely dry.
Reinsert filter and place bin back in
the robot.
Cleaning the Edge-Sweeping Brush
1
Use a coin or small screwdriver to remove
the screw holding the Edge-Sweeping
Brush in place.
2
Pull to remove the Edge-Sweeping Brush.
Remove any hair or debris, then reinstall
the brush.
Roomba j6+ Owner's Guide
®
EN
7