Costway FH10063 Manual Del Usuario página 7

Common faults and solutions
Faults Causes
The 1. Turn the screw
screws are in the wrong
not direction
tightened
2. A screwdriver is
not used
3. The screws are
not aligned with the
holes
No Maybe inside the
hardware package or behind
found a package
There is 1. Assembly failure
strange caused by incorrect
sound. assembly
Unstable. sequence 2. Maybe
the screw is not
tightened
Hardware 1. Maybe lost
missing during shipping 2.
Maybe accidentally
thrown away during
assembly
12
Solutions
1. Align the screw with
the screw hole and begin
to turn the screw in
clockwise
2. Use a proper
screwdriver
Check the parts before
unpacking and do not
discard the packaging
until the product is fully
assembled
1. Please refer to the
instruction manual to
ensure complete and
correct assembly
2. Re-tighten the screws
3. Ask qualified
technician for help.
Ask qualified technician
for help.
Product maintenance
Only regular inspection and maintenance can ensure the
safety and integrity of the product. It is the responsibility of
the user or owner to ensure that the equipment is regularly
serviced. Worn or broken parts should be replaced
immediately before continuing to use the product.
1. To prevent dust accumulation, please wipe the weight
bench regularly
2. Only use a wet rag on plastic parts; Steel parts can only
be wiped with dry rags.
3. If necessary, clean the parts of the product
4. Avoid using cleaners that contain acidic chlorine or
abrasive particles, which may scratch and damage the
equipment.
5. Periodically check to ensure all parts are secure and in
working order. If a part is damaged, do not use it until it is
repaired
13