GE AKH18 Manual Del Propietario Y Instrucciones De Instalación página 9

Installation instructions
m WINDOW REQUIREMENTS
• These instructions are for a standard double-
hung window. You will need to modify them
for other types of windows.
• All supporting parts must be secured
to firm wood, masonry or metal.
• The electrical outlet must be within reach of
the power cord.
• Follow the dimensions in the table and
illustration for your model.
Models A B
AKH 18DN 18 3/8" 27"-42 1/2"
AKH25DN 19 1/2" 29 3/4"-44"
[ ///
B===8
B
(With accordion panels)
J
t
A
-3
[] STORM WINDOW REQUIREMENTS
A storm window frame will not allow the air
conditioner to tilt toward the outside, and will
keep it from draining properly.
To adjust for this, attach a piece of wood to
the sill.
WOOD PIECES
WIDTH: 2"
LENGTH: Long enough to fit inside the
window frame.
THICKNESS: To determine the thickness, place
a piece of wood on the sill to make it 1/2"
higher than the top of the storm window
frame or the vinyl frame.
Attach securely with nails or screws provided
by the installer.
1/2" higher
than vinyl frame
L (on some windows)
|
w
1/2" higher ___ °°d
than storm
window
frame
Storm window
frame
[] PREPARE THE AiR CONDiTiONER
[] Pull down the front panel and remove the
filter. Remove the front panel by lifting up
at an angle.
FB'] Remove the four front screws. Save them
for reinstalling the front housing.
....
[] Remove the front housing.
Remove the screw attaching the green
grounding wire to the case and save it for
reinstalling the wire.
9