Descargar Imprimir esta página

Grundig SM 8680 Manual Del Usuario página 19

Ocultar thumbs Ver también para SM 8680:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 37
OPERATION ______________________________
Preparation
Caution
Switch off the appliance and disconnect it
from supply before changing accessories or
approaching parts that move in use.
Do not remove the blade unit by lifting it from
the blades.
The blade unit is very sharp! Handle the blade
unit with utmost care, especially during clean-
ing, in order to avoid injuries.
Note
Make sure that the notches on the bottom of
the glass jug fit those in the motor housing.
Blending
Notes
Add water to ensure the jug blender functions
smoothly.
Mix 3 units of hard food and 2 units of water
in order to have a smooth jug blender experi-
ence. (i.e: 60 gr hard food 40 ml water)
Caution
Do not put or blend hot food or liquids in the
glass jug. If you process soup, make sure that
the liquid temperature does not exceed 40°C.
To process crushed ice, we suggest you to start
with three quarters of ice in the jug and add 15
ml of cold potable water.
Don´t try to crush ice without adding water to
the jug.
Never let the jug blender operate while empty
(without food).
Never let the jug blender operate without the
glass jug on the motor housing.
Never move or turn the glass jug after it is prop-
erly seated in the place.
Notes
To operate the blender at low speed, turn the
H
control dial
to "1".
If you want to blend with a higher speed, turn
the control dial
H
(5-6).
For short pulses of blending with a high speed,
turn the control dial
lease the control dial
and return to "0" automatically.
If ingredients are to be added during the blend-
ing process, then add them through the open-
ing in the lid
. To do this, take out the cap/
B
measuring cup
.
A
Caution
Never run the blender for longer than 1 minute,
otherwise it would overheat.
After running the appliance for 1 minute, let it
cool down before using it again.
Be sure the motor is switched off and has com-
pletely stopped before removing the glass jug
from the motor housing
D
Do not place any utensil (scraper, fork, etc.) in
the glass jug while blender is operating.
to the desired speed level
H
to "P". When you re-
H
, the blender will stop
.
G
ENGLISH
19

Publicidad

loading