Publicidad
Idiomas disponibles
Idiomas disponibles
Selecting Single or Combination Operation
After you have switched on the appliance, the buttons for
activating the control panels appear.
• If you want to use the left fryer, activate it with the
button. The control panel for the left-hand fryer appears.
• If you want to use the right-hand fryer, activate it with
the
button. The control panel for the right-hand fryer
appears.
• To operate both fryers at the same time, press both the
button and the
button.
Setting the Temperature and Cooking Time
The buttons
and
are available once on each side of
the appliance control panel.
• Press the
button and then set the temperature
(80 °C – 200 °C) with the
• Press the
button and set the cooking time (1 – 60 min-
utes) with the
or
buttons.
• The display alternates between the temperature and the
cooking time.
Starting / Interrupting the Cooking Process
• Start the cooking process with the
• You can interrupt the cooking process with the
(See chapter "Operation"
Synchronised Shutdown
The
button allows you to prepare two different foods with
different cooking times at the same time.
• After pressing the
button, set the desired automatic
programme, temperature and cooking time on both
sides.
• Start the programme with the
The control panel with the shorter cooking time dis-
plays
. This programme does not start until the
longer cooking time has reached the shorter cooking
time.
Automatic Programmes
Select an automatic programme by pressing the
until the symbol of the desired programme flashes.
• The following table shows the factory preset tempera-
tures in degrees Celsius ( °C ) and the minutes ( min ).
The pre-settings are only guide values. Depending on
the size and weight of the food, the temperature and time
may have to be adjusted individually.
• Also observe the information on the food packaging.
Symbol
Programme
Cutlet
Poultry
Prawns
Fish
12
FR3804H_IM
or
buttons.
button.
button.
"Interrupting Operation")
button.
button
°C
min
200
15
200
30
190
10
180
25
Symbol
Programme
Pizza
French fries
Pastry
Vegetables
Reheat
Operation
1. Pull the deep-frying containers out of the appliance by
the handles.
2. If necessary, place the sieve inserts with the silicone
knobs in the deep-frying containers. Push the sieve
inserts all the way down.
3. Push the deep-frying containers back into the appliance.
They must lock into place.
4. Plug the appliance into a properly installed earthed
socket. A beep sounds and all the symbols light up
briefly. The
button lights up.
5. Press the
button to switch on the appliance. The
buttons
and
appear.
6. Select one fryer for single operation or both fryers for
combination operation. The appliance is preset to the
automatic programme
, the temperature 200 °C and
the cooking time 15 minutes.
7. We recommend preheating the appliance for approx.
3 minutes. To do this, set the required temperature and
cooking time to 3 minutes.
8. Press the
button to start the cooking process.
9. After the time has elapsed, 5 signals sound and the
appliance switches to standby mode.
10. Pull the deep-frying containers out of the appliance by
the handle. Place them on a heat-resistant surface.
11. Fill the deep-frying containers with the desired food.
12. Push the deep-frying containers back into the appliance.
13. Switch the appliance on again with the
14. Activate the control panel of the deep-fryer, which con-
tains the deep-frying container with the food.
15. Select an automatic programme or set the cooking time
and temperature manually.
16. Press the
button to start the cooking process.
- If necessary, shake the food halfway through the
cooking time. To do this, pull out the deep-frying
container by the handle. Then push the deep-frying
container back into the appliance.
Interrupting Operation
• Operation is interrupted when you press the
you want to resume operation, press the
°C
min
180
10
200
25
180
12
170
20
160
3
button.
button. If
button.
11.09.23
Publicidad
