Publicidad
Idiomas disponibles
Idiomas disponibles
IMPORTANT: Bladebolt is grade8 heat
treated.
TOSHARPENBLADE
NOTE: We do notrecommend sharpen-
ingblade
- but if you do, be sure the blade
is balanced.
Care should be taken to keep the blade
balanced.
An unbalanced
blade wilt cause
eventual damage
to lawn mower or
engine.
• The blade can be sharpened
with a file
or on a grinding wheel.
Do not attempt
to sharpen while on the mower.
• To check blade balance,
ddve a nail into
a beam or walt. Leave about one inch of
the straight nail exposed.
Place center
h01e of blade over the head of the nail.
If blade is balanced,
it should remain In
a horizontal
position,
tf elther end of the
blade moves downward,
sharpen the
heavy end until the blade is balanced.
GRASS
CATCHER
Crank-
Blade
shaft
ada >ter
keyway
Blade
Ke_....,_ _
washer
edge
adapter
• Remove hubcaps,
hairpin cotters ahd
washers.
• Remove wheels from wheel adjusters.
o Remove any trash or grass cuttings from
inside the dust cover, pinion and/or drive
wheel gear teeth_
,
Put wheels back in place.
° If after cleaning, the drive wheels do not
turn freely, contact your nearest
authorized
service center.
GEAR
CASE
• To keep your drive system working
properly,
the gear case and area around
the drive should be kept clean and free
of trash build-up.
Clean under the drive
cover twice a season.
° The gear case ts filled with lubricant to
the proper level at the factory.
The only
time the lubricant needs attention
is if
service has been performed
on the gear
case_
• If lubricant
is required,
use only Texaco
Starplex Premium
1 Grease, Part No.
750369.
Do not substitute.
ENGINE
LUBRICATION
Use only high quality detergent oil rated with
API service classification SF, SG or SH°
Select the oil's SAE viscos_ grade according
to your expec!ed operating temperature.
• The grass catcher may be hosed with
water, but must be dry when used.
° Check your grass catcher often for
damage
or deterioration.
Through
normal use it wil! wear.
If catcher needs
replacing,
replace only with a manufac-
turer approved
replacement
catchei': '_:`
Give the lawn mower model number
when ordering.
DRIVE
WHEELS
Check front drive wheels each time before
you mow to be sure they move freely°
The wheels not turning freely means t[ash,
grass cuttings, etc. are in the df_ve wheel
area and must be cleaned
to free drive
wheels.
If necessary
to clean the drive wheels,
check both front wheels.
NOTE: Although multi-viscosity oils (5W30,
10W30 etc,) improve sta_ng in cold weather,
these multi-viscosity 0its_ll
resultin increased
oil c,_nsumpti0n when :used above &?.oF;
:
Check your engine oil level more frequently to
avoid possible engine damage from running
'
low on oil.
Change the oil after every 25 hours .of
operation or at least once a year if the lawn
mower is not used for 25 hours in one year.
Check the crankcase oil level before starting
the engine and after each five (5) hours of
continuous use. Tighten olt plug securely each
_Jmeyou check the oil level.
I2
Publicidad
