Publicidad
Idiomas disponibles
Idiomas disponibles
en-us_main.book.book Page 17 Monday, December 18, 2023 1:46 PM
3
Loosen the 2 bolts and the Phillips head screw
and remove the middle hinge bracket from
the refrigerator housing. Set the parts aside.
4
Using a 1/4 in. socket wrench, loosen and
remove the bottom hinge pin
bottom hinge bracket
from the bottom hinge pin and set it aside.
5
Reattach the bottom hinge pin to the opposite
side of the bottom hinge bracket.
from the
d
. Remove the washer
e
6
Using a 3/8 in. socket wrench with a 2-inch
extension, loosen the 2 bolts on the bottom
hinge bracket. Use a Phillips screwdriver to
loosen the screw.
CAUTION
• Be careful that the refrigerator does not fall
forward if the model purchased has the leveler
attached to the bottom hinge bracket.
7
Remove the bottom hinge bracket from the
right side of the housing.
Assembling the Reversed Refrigerator
Door
This feature is only available on some models.
1
Move the bottom hinge bracket to the left
side of the housing, keeping the same
orientation, and reattach with the two bolts
and one screw.
INSTALLATION
17
Publicidad
