en-us_main.book.book Page 33 Monday, December 18, 2023 1:46 PM
Problem
Icemaker is not
Doors are not closed completely.
making enough ice.
• If the doors are not properly closed, ice production will be affected. See the "Doors will not
The temperature setting for the freezer is too warm.
• The recommended temperature for the freezer compartment for normal ice production is
Icemaker is not
Refrigerator was recently installed or icemaker recently connected.
making ice
• It may take up to 24 hours for each compartment to reach the desired temperature and
Ice has bad taste or
Ice has been stored for a long time.
odor.
• Ice that has been stored for too long will shrink, become cloudy, and may develop a stale
The food has not been stored properly in either compartment.
• Rewrap the food. Odors may migrate to the ice if food is not wrapped properly.
The interior of the refrigerator needs to be cleaned.
• See the Maintenance section for more information.
The ice storage bin needs to be cleaned.
• Empty and wash the bin (discard old cubes). Make sure that the bin is completely dry
Parts & Features
Problem
Doors will not close
Food packages are blocking the door open.
correctly or pop
• Rearrange food containers to clear the door and door shelves.
open.
Ice bin, crisper cover, pans, shelves, door bins, or baskets are out of position.
• Push bins all the way in and put crisper cover, pans, shelves and baskets into their correct
The doors were removed during product installation and not properly replaced.
• Remove and replace the doors according to the Removing and Replacing Refrigerator
Refrigerator is not leveled properly.
• See Door Alignment in the Refrigeration Installation section to level refrigerator.
Doors are difficult to
The gaskets are dirty or sticky.
open.
• Clean the gaskets and the surfaces that they touch. Rub a thin coat of appliance polish or
Door was recently closed.
• When you open the door, warmer air enters the refrigerator. As the warm air cools, it can
Refrigerator wobbles
Leveling legs are not adjusted properly.
or seems unstable
• Refer to the Leveling section.
Floor is not level.
• It may be necessary to add shims under the leveling legs or rollers to complete installation.
close correctly or pop open" section in Parts & Features Troubleshooting for more
information.
0°F. If the freezer temperature is warmer, ice production will be affected.
for the icemaker to begin making ice.
taste. Throw away old ice and make a new supply.
before reinstalling it.
positions. See the Operation section for more information.
Handles and Doors section.
kitchen wax on the gaskets after cleaning.
create a vacuum. If the door is hard to open, wait one minute to allow the air pressure to
equalize, then see if it opens more easily.
TROUBLESHOOTING
Possible Cause & Solution
Possible Cause & Solution
33