Publicidad
Idiomas disponibles
Idiomas disponibles
Pressure Washer Rinsing
WARNING!
Be extremely careful if you use the
pressure washer from a ladder, scaffolding or
any other relatively unstable location. Pressure
in a running washer builds as you climb. When
you press the trigger, the recoil from the initial
spray could cause you to fall. The high pressure
spray could also cause you to fall if you are too
close to the cleaning surface.
For Rinsing:
•
Slide the nozzle backward to high pressure, press
the trigger and wait for the detergent to clear.
NOTE: You can also stop detergent flow by removing
detergent siphoning tube from container.
•
Keep the spray gun a safe distance from the area
you plan to spray.
OWNER'S RESPONSIBILITIES
Follow the hourly or calendar intervals, whichever occurs first.
More frequent service is required when operating in adverse conditions noted below.
MAINTENANCE SCHEDULE
FILL IN DATES AS YOU COMPLETE
REGULAR SERVICE
MAINTENANCE TASK
PRESSURE WASHER
Check/clean water inlet screen
Check high pressure hose
Check detergent hose
Check spray gun and assembly for
leaks
Purge pump of air and contaminants
Prepare pump for storage below 32°F
ENGINE
Check oil level
Change engine oil
Service air cleaner
Service spark plug
Service spark arrester
Prepare for storage
¹
Clean if clogged. Replace if perforated or torn.
²
Change oil after the first (5) operating hours and every 50 hours or every year, whichever occurs first, thereafter.
Change sooner when operating under dirty or dusty conditions.
³
Replace more often under dirty or dusty conditions.
•
•
Automatic Cool Down System
(Thermal Relief)
If you run the engine on your pressure washer for
3-5 minutes without pressing the trigger on the spray
gun, circulating water in the pump can reach
temperatures between 125°–155°F. The automatic
cool down system engages at this temperature and
cools the pump by discharging the warm water onto
the ground, preventing internal pump damage.
MAINTENANCE
HOURLY OPERATING
INTERVAL
Every 50
Every 100
Before
Hours or
Hours or
Each Use
Yearly
Yearly
X¹
X
X
X
X
See "Storage" on page 14.
X
X²
X
If unit is to remain idle for
longer than 30 days.
9
Apply a high pressure spray to a small area, then
check the surface for damage. If no damage is
found, it is okay to continue cleaning.
Start at the top of the area to be rinsed, working
down with same overlapping strokes as you used
for washing and applying detergent.
X³
X
SERVICE DATES
Publicidad
