Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
CASING OPENING
Before opening the casing ensure that the
cutting device has come to a complete stop.
Then proceed as follows:
Switch off the engine and wait for about two
minutes. Then extract the spark plug cap.
Then remove the screw (1) which acts on the
safety switch, and then all the other screws.
No screwdrivers or other tools are necessary.
To close the casing, re-tighten it using the
two screws provided, securely tightening
firstly screw (2) and then screw (1). At the
end of this operation re-insert all the other screws, it is essential that only the screws
provided are used.
WARNING
If the screw which acts on the micro-switch is not securely tightened the engine
will not start!
Never use any different screws, only those supplied with the machine.
The use of screws of different type may cause serious risk to the operator and
constitutes a valid motive for the annulment of the guarantee due to serious
negligence by the user
28
Publicidad
