American Standard Colony Pro 7075800 Manual Del Propietário página 3

INSTALLATION INSTRUCTIONS
1
INSTALL SPOUT
Turn off hot and cold water
supplies before beginning.
• Insert SPOUT SHANK (1) through center
hole of SINK (2), making sure RUBBER
RING (3) is properly positioned.
• Assemble FRICTION WASHER (4) and
LOCKNUT (5)
onto threads of SPOUT SHANK (1) from
underside of SINK (2).
• Insert LIFT ROD (6) through SPOUT (7).
Align SPOUT (7) and tighten LOCKNUT (5).
2
VALVE INSTALLATION
• Insert VALVE BODY (2), RUBBER RING (3),
and two hoses through the side hole of the
sink.
• From under sink tighten LOCK NUT (1) to
secure VALVE BODY (2).
• Push the TEE ASSEMBLY (4) into the
HOSE CONNECTOR (5) slide down
LOCKING COLLAR (7) until it snaps into
place to secure connection.
• Push the Hoses (6) on to T-Connector and
secure it with the sleeve by sliding it over.
6
7
1
2
3
1
6
3
2
4
5
5
7
4