Harman Martin ERA 700 Performance IP Instrucciones De Seguridad E Instalación página 27

5. Note the position of the arrow marked FRONT (see A in illustration above). Working from a stable
platform, hang the fixture on the truss and fasten the two rigging clamps onto the truss with FRONT
pointing towards the main area to be illuminated.
6. If installing the fixture outdoors, make
sure that the openings for cables in the
anti-tamper box D face downwards.
7. Secure the fixture with a safety cable as
directed below.
8. Check that the head will not collide with
other fixtures or objects.
Securing with a safety cable
1. Obtain a safety cable (or other
secondary attachment) that is approved
for the weight of the fixture.
2. Fasten the cable to the safety cable
attachment point in the base of the
fixture (see C in illustration above) by
either looping it around or fastening a
carabiner clip to the attachment point C.
3. Remove as much slack as possible
from the safety cable (by looping the
cable around the truss chord, for
example) and fasten it to a secure anchoring point.
4. Make sure that the safety cable will hold the fixture if a primary attachment fails.
5. Make sure that there is no possibility of the head colliding with other fixtures or objects when it moves
through its full pan and tilt ranges,
Martin
A
C
®
ERA 700 Performance IP Safety and Installation Manual Rev. C
B
D
27